- DTN Headline News
Prep Bins for Harvest
Thursday, September 20, 2018 7:32AM CDT
By Scott Williams
DTN Entomologist

It may feel like only yesterday that you were doing spring cleaning, but the amber waves of grain outside my window tell me how much time has passed. Hopefully, all the seeds you've sown have grown into mature crops, and that harvest is only weeks away. Now is the perfect time to talk about fall cleaning and to prepare for storing your grain.

You can save yourself a headache and money if you take action before harvesting a single ear of corn. The most important -- and I mean most important -- aspect of grain storage is to keep it clean. Researchers at Purdue University have documented that a small investment in sanitation can increase grain values by as much as $0.85 per bushel. That may not seem like much, but it quickly adds up to a significant amount.

INSPECT AND CLEAN

Start by examining your grain bins for signs of damage or wear. Seal up cracks or holes to keep pests out to make other management practices (i.e., fumigation) more effective. While the bin is empty, clean out old grain or other pest refuges. And, since you're at it, clean any equipment that handles grain, such as combines and augers. The last thing you want to discover is that you've been playing host to bugs during the past few months. So, a good wash or vacuuming will remove old material and unwanted pests.

Clean the area around your bins, as well. Long grass and shrubbery provide hiding spots for mice and insects. Leave a 4-foot gravel perimeter around bins, and remove those refuges. Doing so forces pests to relocate. Also, make sure water drains away from bins. Less standing water reduces the chances of the grain getting wet and moldy while in storage.

If your bin has a history of infestation, you may want to apply a preventative pesticide once you're done cleaning. Products such as Tempo SC Ultra (cyfluthrin), Storcide II (chlorpyrifos-methyl and deltamethrin) and Perma-Guard (diatomaceous earth) can be applied to the inside walls of a bin. Spray until there is runoff on all surfaces. Wait at least 24 hours before loading the grain. Pyrethroid products can also be applied as a perimeter spray on the lower 15 feet of the outer walls. If past infestations were particularly bad, fumigating the bin may be necessary. Products approved for empty-bin fumigation, such as Phostoxin (phosphine), can eliminate any remaining pests but should be applied only by a certified applicator.

DRY AND AERATE

Once you're done with the bin prep, you're ready to load the grain. Separating out broken kernels and foreign objects will improve shelf life and reduce damage to the grain and the handling equipment. Cooling and drying grain before storage also goes a long way in maintaining its value over the next few months. Drying the grain below 14% moisture and aerating the bulk temperature below 50ºF will help prevent moisture migration, mold growth and grain pest survival.

As you load the grain, you can also apply a chemical protectant. These products are registered by crop, with some, such as Diacon-D IGR (s-methoprene), used for corn and soybeans, while others, such as Actellic 5E (pirimiphos-methyl), are only approved for corn. Be sure to check the label.

Now, grab your brooms or other preferred cleaning tools and get to work. You'll thank yourself in a few months when your grain is still clean, whole and readyfor market.

For More Information:

-- University of Nebraska bin and equipment cleaning guidelines:

https://cropwatch.unl.edu/…

-- Purdue University grain storage sanitation practices: https://www.extension.purdue.edu/…

(AG/CZ)


blog iconDTN Blogs & Forums
DTN Market Matters Blog
Editorial Staff
Monday, September 17, 2018 10:58AM CDT
Friday, September 14, 2018 1:57PM CDT
Monday, September 10, 2018 12:48PM CDT
Technically Speaking
Editorial Staff
Monday, September 17, 2018 10:24AM CDT
Monday, September 17, 2018 10:23AM CDT
Monday, September 10, 2018 8:48AM CDT
Fundamentally Speaking
Joel Karlin
DTN Contributing Analyst
Wednesday, September 19, 2018 6:57PM CDT
Tuesday, September 18, 2018 12:24PM CDT
Monday, September 17, 2018 12:37PM CDT
DTN Ag Policy Blog
Chris Clayton
DTN Ag Policy Editor
Thursday, September 20, 2018 8:13AM CDT
Tuesday, September 18, 2018 1:52PM CDT
Monday, September 17, 2018 3:21PM CDT
Minding Ag's Business
Katie Behlinger
Farm Business Editor
Monday, September 10, 2018 4:40PM CDT
Monday, July 23, 2018 4:05PM CDT
Friday, July 6, 2018 2:37PM CDT
DTN Ag Weather Forum
Bryce Anderson
DTN Ag Meteorologist and DTN Analyst
Thursday, September 20, 2018 12:24PM CDT
Tuesday, September 18, 2018 3:37PM CDT
Friday, September 14, 2018 2:54PM CDT
DTN Production Blog
Pam Smith
Crops Technology Editor
Friday, August 31, 2018 10:30AM CDT
Thursday, August 9, 2018 7:47PM CDT
Friday, July 27, 2018 11:38AM CDT
Harrington's Sort & Cull
John Harrington
DTN Livestock Analyst
Monday, September 17, 2018 11:55AM CDT
Thursday, August 30, 2018 4:06PM CDT
Friday, August 3, 2018 5:33PM CDT
An Urban’s Rural View
Urban Lehner
Editor Emeritus
Thursday, September 13, 2018 5:39PM CDT
Tuesday, September 4, 2018 11:26AM CDT
Monday, August 20, 2018 3:04PM CDT
Machinery Chatter
Dan Miller
Progressive Farmer Senior Editor
Friday, September 7, 2018 12:40PM CDT
Thursday, August 30, 2018 12:13PM CDT
Wednesday, August 22, 2018 2:18PM CDT
Canadian Markets
Cliff Jamieson
Canadian Grains Analyst
Thursday, September 20, 2018 3:11PM CDT
Wednesday, September 19, 2018 2:16PM CDT
Tuesday, September 18, 2018 3:25PM CDT
Editor’s Notebook
Greg D. Horstmeier
DTN Editor-in-Chief
Friday, August 24, 2018 5:53PM CDT
Friday, August 17, 2018 5:12PM CDT
Thursday, August 16, 2018 7:00AM CDT
Copyright DTN. All rights reserved. Disclaimer.
Powered By DTN